|
  ll Lamb standard rear disc brake systems include billet
calipers, cast rotors, billet rotor adapters, specially ground 7075-T6 brackets and disc
brake pads.
 Lamb heavy-duty front disc brake
systems include billet calipers, cast rotors, billet rotor adapters, billet hubs,
bearings, studs, specially ground brackets and disc brake pads.
PLEASE NOTE: Some front
disc brake systems require spindle modification prior to disc brake installation. These
applications are noted with an asterisk in the list below. The spindles you intend to use
in these systems must be sent to us prior to our shipping your front disc brake order. For
the nominal charge of $75.00 per pair, we will modify your spindles to accept the new
calipers and brackets, assemble the disc brakes on each spindle, and ship them completely
assembled to you. If your spindles are damaged or corroded beyond safe use, we can provide
you with new ones for most applications at a modest cost.
All brake kits are available in HD, Retro, and Lightweight versions.
-
HD is the original design and still the benchmark. The HD kit utilizes the #1602 caliper with the HD 11.5 rotor.
-
The Retro kit is the combination of the HD and Lightweight versions. The retro kit utilizes the #1602 caliper with the lightened rotor.
-
The Retro kit is the new standard for most applications.
-
The Lightweight kit is specifically for lightweight dragsters running less than 175mph, which utilizes the #1608 caliper with the lightened rotor.
|
|
|
Housing End I.D. Sheet
|
|
|
|
|
|
Lamb
Front and Rear Disc Brake Systems |
|
|
 |
#136D Lamb
standard 4-3/4" & 5" B.C. 11/16" Stud Rear
Brake System – utilizes #1602 calipers |
|
$895.00 |
|
|
|
#136D-LTWT Lamb
lightweight 4-3/4" & 5" B.C. 11/16" Stud Rear
Brake System – utilizes #1608 calipers |
|
$1,095.00 |
|
|
|
#136D-Retro Lamb
lightweight 4-3/4" & 5" B.C. 11/16" Stud Rear
Brake System – utilizes #1602 calipers |
|
#137 Lamb
rear
disc brake system for Strange one-piece differential housing |
|
$995.00 |
|
| $995.00 |
|
|
#137-LTWT Lamb
lightweight rear
disc brake system for Strange one-piece differential housing |
|
#137-Retro Lamb
lightweight rear
disc brake system for Strange one-piece differential housing |
|
$1,195.00 |
|
| $1,195.00 |
|
|
#170R
Front Brake
System - Includes Billet Calipers, Steel Rotors, Billet Rotor
Adaptors, Specially ground 7075 brackets, Disc brake pads &
hardware. |
|
$1,173.00 |
|
|
|
#172A Disc
Brake System for Early Ford Mustang |
|
$1,285.00 |
|
|
|
#172C Disc
Brake System for 1978-88 Mustang, Cougar, and Thunderbird |
|
$1,285.00 |
|
|
|
#172D Disc
Brake System for 1989-93 Mustang, Thunderbird |
|
$1,285.00 |
|
|
|
#172E HD Disc
Brake System for 1994 Mustang |
|
$1,285.00 |
|
 |
|
#175A Front
Brake System for 1962-74 Early GM including Camaro, Chevelle, Chevy II, Nova (fits drum
spindle) |
|
#176A *HD Front Brake SystemFront
Brake System for 1967-69 Camaro (fits drum spindle) - utilizes #1602 calipers |
|
#176A-LTWT Front
Brake System for 1967-69 Camaro (fits drum spindle)- utilizes #1608 calipers |
|
#176A-Retro Front
Brake System for 1967-69 Camaro (fits drum spindle)- utilizes #1602 calipers |
|
$1,285.00 |
|
| $1,285.00 |
| $1,485.00 |
| $1,385.00 |
|
#178B HD Front
Brake System for 1963-64 Corvette |
|
$1,285.00 |
|
|
#178C HD Front
Brake System for 1965-67 Corvette |
|
$1,285.00 |
|
|
#178D HD Front
Brake System for 1968 Corvette |
|
$1,285.00 |
|
|
|
#178E HD Front
Brake System for 1969-83 Corvette |
|
$1,285.00 |
|
|
|
#180 Front
Brake System for Strange Front-Wheel-Drive Struts |
|
$1,285.00 |
|
|
|
#180-RETRO
Retro Front
Brake System for Strange Front-Wheel-Drive Struts |
|
$1,385.00 |
|
|
|
#180-LTWT
Lightweight Front
Brake System for Strange Front-Wheel-Drive Struts |
|
$1,485.00 |
|
|
If you are interested in A-Body
double-adjustable front shocks, you may order (2) #350A (for automatic
trans cars) or #350B (for manual trans cars) Lamb A-Body front shocks.
They come complete with stock-type mounts to make installation simple.
Their cost is $685.00/ea.
|
|
|
|
#180A HD Front
Brake System for Chrysler 'A' Spindle (fits drum spindle) |
|
$1,285.00 |
|
|
#180A-1
Chrysler A-body spindle (each) - fits Barracuda, etc.; original
spindle completely refurbished, including electroless nickel
plating and baking. |
|
$185.00each |
|
|
#180A-2 Lower ball joint for Chrysler A-body car (right side) |
|
$135.00each |
|
#180A-3 Lower ball joint for Chrysler A-body car
(left side) |
|
$135.00each |
|
#180A-4 Lamb Chrysler A-body aircraft mounting hardware kit for lower ball joints |
|
$42.00each |
If you are interested in B-Body double-adjustable front shocks, you
may order (2) #351A (for automatic trans cars) or #351B (for manual
trans cars) Lamb B-Body front shocks. You will have to provide
specific dimensional information in order to assure we make them for
your specific car. There were several different ways the original
shocks were mounted. They come complete with stock-type mounts to make
the installation simple. Their cost is $685.00/ea.
|
|
#180B HD Front
Brake System for Chrysler 'B' or 'E' Spindle (fits drum V-8 spindle) |
|
$1,285.00 |
|
|
#180B-1 Chrysler B-body spindle (each) - various dimensions will have to be verified to insure correct spindle is chosen - there were several produced on these cars. |
|
$180.00each |
|
#180B-2 Lower ball joint for Chrysler B-body car (right side) |
|
$95.00each |
|
#180B-3 Lower ball joint for Chrysler B-body car
(left side) |
|
$95.00each |
|
#180B-4 Lamb Chrysler B-body aircraft mounting hardware kit for lower ball joints |
|
$42.00each |
|
#180BS Chrysler "B' body spindle - original spindle complete refurbished, including electroless plating and baking. |
|
$185.00each |
|
#181 Lamb
Needle Bearing Spring Mounts (2) For Strange Front Strut |
|
$213.21 |
|
|
|
#184 *HD Front
Brake System for 1982-93 Camaro/Firebird |
|
$1,285.00 |
|
|
|
#185 *HD Front
Disc Brake system for *79-85 "A" Body |
|
$1,285.00 |
|
|
|
#186 *HD Front Brake System for 1994+ Camaro/Firebird (includes: hub,
bearings, studs, and spindle) |
|
$1,695.00 |
|
|
|
#186-RETRO Front Brake System for 1994+ Camaro/Firebird (includes: hub,
bearings, studs) * Plus an additional $75 for required, customer supplied, spindle modification. |
|
$1,795.00 |
|
|
|
#187 *HD Front
Disc Brake system for ’94 Mustang (Fits
'95 Mustang if '94 spindles are retrofitted. A separate system will not be produced for
'95 Mustangs due to the original spindle design from Ford) |
|
$1,285.00 |
|
|
|
#188 *'98 Dodge
Truck Super Stock Front Brakes (incl. Hub, Bearings, Studs, Spindle) |
|
$1,585.00 |
|
|
|
|
|
